Power flushing is the fastest and most effective way to flush a heating system, the flushed system is achieved with minimal disruption and dismantling. If you fail to look after your central heating system by having a power flush regularly, there is an increased chance of your boiler, radiators and pipes breaking down.
Our promise is to always be fair honest and open on pricing. Power Flushing starts from £399 this would typically include 4 radiators. For 5 to 11 Radiators a charge of £799 and for anything more than 11, please call for a quick and easy quote.
a power flush is a cleansing process which aims to remove deposits of sludge, rust and any other debris from your central heating system. If left, these contaminants can seriously affect the efficiency of a heating system and in severe cases, a power flush is the only option available.
Power flush equipment connects to your central heating and cleans the whole system without having to take off all the radiators. Power flush cleaner is added to the system water and starts to loosen the rust. The heating is turned on and radiator surfaces are checked for cold spots. Flushing water through individual radiators and vibrating cold spots allows the sludge to rapidly loosen. The sludge flows from the radiator and is collected. Radiators and pipe work are flushed until water samples are clean and pH neutral. Inhibitor fluid is added at the end of the process to help prevent future build-up of future contamination.
It is suggested that the power flush process is carried out if you plan on connecting a new boiler replacement to an old heating system. This is because most new boilers are condensing boilers and any contaminants already present in the heating system can rapidly damage the internal pipe work of the new boiler.
Power flushing is the fastest and most effective way to flush a heating system, the flushed system is achieved with minimal disruption and dismantling. If you fail to look after your central heating system by having a power flush regularly, there is an increased chance of your boiler, radiators and pipes breaking down. Power flushing can greatly extend the life of your system. If you think your heating system requires a power flush give call bristol plumber 24-7 today.
Whether you are looking to service your boiler, replace your boiler or move from ‘oil to gas’ it is essential to find the right heating engineer to undertake any work. A professional heating engineer will provide you with all the information and advice you need to consider your options. They will provide quotes and provide peace of mind that all work is carried out to appropriate standards.
It is essential you use a Gas Safe registered engineer to install, service or check gas appliances including boilers. To carry out work on gas installations and appliances safely and legally, gas engineers must be on the Gas Safe Register
A number of our key locations are listed below, but if you're unsure from our locations map whether we can send an engineer to your home, please contact our customer service team on 01225 247 365.